MoTeC Global Forum

Hi

Vertical and longitudal accel GForce show a constant, identical, unrealistic number and those numbers do not change when the dash is moved. Both can not be zeroed.

Lateral G accel is correct.

All three values used to work just fine last week
Did I mess up something in the config? I would not know what though.

Please advise.

TIA
D

When you are connected to the dash with your laptop in dash manager you can goto online then monitor channels and you can view the current value of the channel to check it.

Hi Antony

That is exactly what I did. My post is based on the online monitor channels readings.

If you go into Connections - Devices - Internal Pins you should be able to see the Scaling and Offsets for each of the 3 G channels. Maybe they have been inadvertantly altered from the correct values.

Hi quadcam

Good point. I will check and report Here.
Thank you