Automatically Clearing Alarm Messages

[HKS_TRD]

Is there any way to have an alarm message automatically clear on the C127 when the alarm condition is no longer present
For example having a handbrake on message appear when engaging the handbrake which automatically clears when releasing the handbrake

[adrian]

In the alarm setup, in the options tab, set remove message automatically after 0 seconds and 'dont display....' to 0 seconds.

Then the message will only be shown when the alarm condition is true.

[HKS_TRD]

Hi Adrian
Just had a chance to try that today and it worked perfectly, thankyou