Page 1 of 1
M1 Build Release November 1
Posted:
Fri Oct 25, 2013 10:01 amby JamieA
M1 build is to be released on November 1.
The software will be freely available to download, along with documentation and sample projects.
This forum is the place to ask others using build your questions.
-Jamie
Re: M1 Build Release November 1
Posted:
Sat Nov 02, 2013 6:04 pmby PQatPIT
?
Re: M1 Build Release November 1
Posted:
Mon Nov 04, 2013 7:59 pmby claudiumxg
where can it be Downloaded?
Re: M1 Build Release November 1
Posted:
Wed Nov 06, 2013 1:43 pmby JamieA
Just delayed a by a few days due to documentation delay.
Hopefully by the end of this week, fingers crossed.
thanks for your patience.
Jamie
Re: M1 Build Release November 1
Posted:
Wed Nov 06, 2013 9:44 pmby Allan
Looked something like this in the Motec office when when the Manual was proof read?
or
Re: M1 Build Release November 1
Posted:
Tue Nov 12, 2013 6:47 amby Fast_Moto
Any update on the release?
Re: M1 Build Release November 1
Posted:
Wed Nov 13, 2013 3:58 amby PEI330Ci
https://moteconline.motec.com.au/Home/Downloads*Note: There is extensive hardware and development documentation under the help menu. These are in PDF format, which can be moved/copied from the installation folder. Also, there are 2 build examples given.
Certainly well worth the wait! Well done Motec!
Re: M1 Build Release November 1
Posted:
Wed Nov 13, 2013 2:56 pmby JamieA
Yes, M1 Build is finally up and available for download on the link provided.
We are just working on the web pages, and data sheets to go with it.
Please feel free to ask your questions on this forum, as phone and email support for the build product is a part of the purchased M1 development toolkit.
Regards,
Jamie