Page 1 of 1

Acceleration Enrichment

PostPosted: Thu Mar 21, 2019 8:23 pm
by rayhall
I am about to tune my Audi V10. Never use a M1 before. I cannot find any setting in he software for acceleration enrichment and deceleration enleanment. There must be cases this needs to be changed.

Ray.

Re: Acceleration Enrichment

PostPosted: Fri Mar 22, 2019 2:37 am
by David Ferguson
The M1 uses a Fuel Film model to handle the cases you mention. You tune this in M1 Tune under Tuning->Fuel Film Primary (and Fuel Film Secondary if you have secondary injectors). Start with reading the help for "Fuel Film Primary". You may want to look at this webinar for some info on setting this up:

https://www.hpacademy.com/previous-webi ... -motec-m1/

Re: Acceleration Enrichment

PostPosted: Fri Mar 22, 2019 8:57 am
by Stephen Dean
Hi Ray,

This is also covered in the M1 Essentials training document, the Fuel Film operation and tuning process is described from Page 124.

M1 Essentials Training Notes

Re: Acceleration Enrichment

PostPosted: Thu Mar 28, 2019 8:16 pm
by greenamex2
SDean wrote:Hi Ray,

This is also covered in the M1 Essentials training document, the Fuel Film operation and tuning process is described from Page 124.

M1 Essentials Training Notes


Massive thanks for posting the link...just got up to the worksheet bit and spent a fun evening configuring the worksheet tab thingy that made absolutely no sense to me before! Will save me loads of time, got rid of all those nasty turbo etc related settings and can now find things quicker.