Water Pump
2 posts
• Page 1 of 1
Water Pump
by mdn-t on Thu Jun 04, 2026 4:47 am
Hi. Can you tell me if you can control the water pump directly from the M1 using the Half Bridge (Drive "Low Side") output? Pump Davies Craig EWP150. Current consumption 10. 5 amperes. Plus, the pump is fed with PDM.
- mdn-t
- Posts: 4
- Joined: Wed Feb 08, 2023 6:15 pm
Re: Water Pump
by Stephen Dean on Thu Jun 04, 2026 5:44 pm
Hi,
From experience, it is better to use the PDM as the power supply for the EWP, and use the Davies Craig controller to do the control of the pump.
From experience, it is better to use the PDM as the power supply for the EWP, and use the Davies Craig controller to do the control of the pump.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
MoTeC Research Centre Melbourne, Australia
-
Stephen Dean - Site Admin
- Posts: 1852
- Joined: Tue Dec 02, 2014 10:29 am
- Location: Melbourne
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 18 guests