You can now select your own on screen gauges to be displayed on your HD-VCS videos.
Compatible with HD-VCS firmware v0.00.27#181 or later. Available here.
There are four gauges to select from.
'Large' This is the standard gauge set that is installed with the latest firmware.
![Image](http://www.motec.com.au/image_display.php?path=1174943076_hdvcs-gauges-Large-Content.png)
'Medium' No lap time but still plenty of information.
![Image](http://www.motec.com.au/image_display.php?path=1605797919_hdvcs-gauges-Medium-Content.png)
'Small' Just the important stuff.
![Image](http://www.motec.com.au/image_display.php?path=1156720704_hdvcs-gauges-Small-content.png)
'Boat' Boat specific gauges. No gear, no brake. Just G, speed, RPM and throttle
![Image](http://www.motec.com.au/image_display.php?path=1006847012_hdvcs-gauges-SmallG-Content.png)
These gauges are available with the latest firmware only and as such can be found in the same download.
Sending your desired gauge to the dash is a simple task.
Locate the 'vcsosd.dat' file you want and place it on your SD card in a folder named 'transit'
Next time the HD-VCS is powered up it will load your new file into the internal memory and start using is straight away.