Timing lock
Posted: Sat Feb 27, 2021 12:56 amDo we have to check and recalibrate timing lock for set the trigger offset on 86 package v5 ?
Thanks
Thanks
MoTeC Global Forum
The official support forum for MoTeC products
https://forum.motec.com.au/
Timing lock
Page 1 of 1
Posted: Sat Feb 27, 2021 12:56 amRe: Timing lock
Posted: Mon Mar 01, 2021 11:37 amThe Reference Offset value should always be validated for any Package when it is first installed. If no changes are made to the engine mechanically then the same calibrated number can be used throughout further Package upgrades. If any changes are made to the engine mechanically then this value should be revalidated.
Re: Timing lock
Posted: Mon Mar 01, 2021 11:26 pmSDean wrote:The Reference Offset value should always be validated for any Package when it is first installed. If no changes are made to the engine mechanically then the same calibrated number can be used throughout further Package upgrades. If any changes are made to the engine mechanically then this value should be revalidated.
The engine is all stock
But something made the TCU receive the wrong data so it wont change gear like the way it should be.