Hello,
Thanks for taking the time to help me with this. I have my C127 setup pretty well but I am struggling to get the dash to output a traction slip aim. Basically I want to know what my current slip aim % is. I have the motec keypad and sometimes forget what setting each button is. I've tried numerous different pids and none work on my dash. Any tips? Thanks!
C127 Traction AIM
3 posts
• Page 1 of 1
C127 Traction AIM
by Burnett03 on Wed Aug 21, 2024 2:06 pm
- Attachments
-
- 20240819_200248_copy_750x1000.jpg (158.24 KiB) Viewed 2518 times
-
- 20240819_200240_copy_750x1000 (1).jpg (151.97 KiB) Viewed 2518 times
- Burnett03
- Posts: 2
- Joined: Tue Aug 20, 2024 1:34 pm
Re: C127 Traction AIM
by Stephen Dean on Wed Aug 21, 2024 5:09 pm
Hi,
Are you wanting to display the current value of the various switch inputs into the Display?
Are you wanting to display the current value of the various switch inputs into the Display?
Stephen Dean
MoTeC Research Centre Melbourne, Australia
MoTeC Research Centre Melbourne, Australia
-
Stephen Dean - Site Admin
- Posts: 1721
- Joined: Tue Dec 02, 2014 10:29 am
- Location: Melbourne
Re: C127 Traction AIM
by Burnett03 on Sat Aug 24, 2024 2:19 am
Basically I'd like to see something that says "xx% Traction slip aim" Thanks
- Burnett03
- Posts: 2
- Joined: Tue Aug 20, 2024 1:34 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest