M142 fuel table help

Discussion and Support for MoTeC's M1 series ECUs

M142 fuel table help

Postby itsme71190 on Sun Nov 17, 2024 10:33 am

Good morning,
So my tuner seems to be extremely busy and we can't find a good time for him to remote in and adjust cold start fuel. I moved from a very hot environment to somewhere where it's been under 20 degrees and it takes about 15 starts for car to kick over. Can someone walk me through m1 to adjust these tables by about 15%
itsme71190
 
Posts: 1
Joined: Thu Oct 10, 2024 3:17 am

Re: M142 fuel table help

Postby Stephen Dean on Mon Nov 18, 2024 11:55 am

Hi,

have a look at the Engine Crank Fuel Volume Compensation table. You can modify the values by a percentage. This is done by highlighting the cell/s needed, and then, for example, typing 1.2*. This will apply a 20% trim to the highlighted cells.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
Stephen Dean
Site Admin
 
Posts: 1721
Joined: Tue Dec 02, 2014 10:29 am
Location: Melbourne


Return to M1 ECUs

Who is online

Users browsing this forum: No registered users and 3 guests

cron