MoTeC Global Forum

Hello
I have a M150 and have this pedal BDBW-GM06

Lokar
https://www.lokar.com/throt-assemb-pedal-pads.html

All GM Crate Engines, '08-'12 Cadillac CTS/CTSV, and '10-'12 Camaro #10379038, #10367117, #22741799, #22741800, and #92199239

https://www.lokar.com/assets/instructio ... ByWire.pdf

The number on the Sensor is Williams Control 134734

I think this may be a data sheet for it but im not sure. the works on the Apps side but not the other 3 wires. but this is beyond me as well.
https://www.cw-industrial.com/getmedia/ ... t?ext=.pdf

Hi,

That Williams control setup is not acceptable for a DBW pedal as it only has a single sensor output. The Lokar one can be used.

Thre lokar one is what I bought (GMO6) and the senor that is on the side of it is the Williams.

Your Williams Controls data sheet is not for the sensor as programed in the Lokar pedal. I am trying to get you the correct data sheet, but I would think you could go with the info in the Lokar instructions -- that indicates it should work with the MoTeC DBW Pedal setup,as there are two analog voltage outputs.

I couldn't get a complete data sheet as the outputs are programmed for different customer requirements, but here is the pinout for 134734 that clearly shows two APS outputs.

That got it, thank you sir!