MoTeC Global Forum

Hi Guys

Can anyone help me with Barra Cam reference values
Have an M130 that was running AU SOHC 4.0 now changed to barra engine
DBW,VCT & cam sensors all wired in
I believe the crank trigger will still be correct both being 36-1

Thanks
Jason

Hi,

The Ford Duratech Reference Mode should be the correct mode for this engine. if you have an Input Capture, this can be verified.

Yep, as Stephen mentioned.

Ford Duratec mode, most likely with an offset around 400-420
Crank and Cams are Mag

Thanks guys