Page 1 of 1
CAN Inspector
Posted:
Wed Mar 17, 2021 4:05 pmby Victorgarage
so basically how to operate this software ?
will i just run the software with the UTC cable plugged into the M1 ECU ?
thanks
Re: CAN Inspector
Posted:
Thu Mar 18, 2021 8:35 amby adrian
CAN Inspector can use an M1, Colour Dash or UTC as a gateway. If you have an M1 you can use that directly rather than adding the UTC as well.
Re: CAN Inspector
Posted:
Sun Mar 21, 2021 3:08 amby Victorgarage
Yes thanks.. sorry i already managed that.. just silly questions forgive me