MoTeC Global Forum

Posted: **Tue Jan 19, 2021 2:32 am**

Hi,

During the setting up of an engine test cell, I'm looking for a way to configure the communication between M1 ECU's (actually M142) and a supervisor (Kronos software by Rotronics) to monitore live datas.

Do you provide a .dbc file to define CAN communication ?

Thanks in advance

Posted: **Tue Jan 19, 2021 3:54 am**

The firmware running in the M142 will define the CAN communication supported. What firmware package do you expect to be using?

For example, this thread regarding the diesel package has the DBC file for Diesel firmware package messages:

viewtopic.php?f=73&t=4638&p=21068&hilit=M1+DBC#p21068

And this thread has the DBC file for the GPR package...

viewtopic.php?f=56&t=3675&p=16645&hilit=M1+DBC#p16645

Posted: **Tue Jan 19, 2021 4:30 am**

I use the GPR-DI package, will use the second file your refer to (didn't find this thread, sorry for duplicating). Thanks !

MoTeC Global Forum

CAN Comm - M1 to Supervisor

CAN Comm - M1 to Supervisor

Re: CAN Comm - M1 to Supervisor

Re: CAN Comm - M1 to Supervisor