Page 1 of 1
Samsonas sequential reverse lights
Posted:
Thu Dec 27, 2018 6:56 pmby DJDINO
Merry Christmas all.
I have just fitted a samsonas sequential into my Tommi Mac and need to have the reverse lights working, I have the M150 talking to the CDL3 dash with gear position being displayed on it, I can hook up a relay with neg trigger, can the CDL3 activate the relay ?
Re: Samsonas sequential reverse lights
Posted:
Thu Dec 27, 2018 8:46 pmby greenamex2
If you have the IO license (and the gear position sensor picks up when in reverse), yes.
Re: Samsonas sequential reverse lights
Posted:
Fri Dec 28, 2018 10:13 amby stevieturbo
The Samsonas gear display has provision for reversing light.
Re: Samsonas sequential reverse lights
Posted:
Fri Dec 28, 2018 7:03 pmby DJDINO
Thanks boys, yes have IO on the CDL3, will use AUX output 1, I am using the CDL3 to display gear position so Samsonas display is still in the box.
Any tips on how to do setup in display manager ?
Re: Samsonas sequential reverse lights
Posted:
Sat Dec 29, 2018 3:22 amby David Ferguson
Create a User condition, something like "Gear is equal to -1". Use the result of this condition as the channel to control the AUXOUT.
Re: Samsonas sequential reverse lights
Posted:
Wed Jan 02, 2019 11:14 amby DJDINO
Thanks David, I’m away till next week so will have a look when I get back in front of the computer. I had a bit of a look and the CDL3 is receiving gear position from the M1
Re: Samsonas sequential reverse lights
Posted:
Fri Jan 11, 2019 2:22 pmby rntechnologies
Regardless of the source, the user condition method that David outlined above is the best way to control the output.