Blink Marine Keypads

[Nickwinsor]

Hello,

On an M150 running the 86 package, you can configure a keypad to connect directly to the ECU. I'd like to do this with a Blink Marine keypad (PKP-1600-SI) - being a CANOPEN device like the Motec ones, does this mean it's compatable and I just set the base ID to suit the keypad? If it's not compatable, I do have a C125 dash. Is it possible to set this keypad up in the dash and configure latching / momentary buttons etc?

Thank you,
Nick

[MikeD]

I don't know regarding direct control by the M1 (I assume it will not work) but it's possible when using the C125 for sure.

If you need some help then let me know.

Regards,
Mike