Bosch Motorsport sensor calibration?

[Clean RC]

Ok since it is 2025 and Motec is a Bosch company. How hard is it going to be to get a calibration for the Bosch pressure/temp sensor 0 261 230 340 added to the drop down menu in the M1 tune software? I know its probably been superceeded by now. I know this would help a lot of amateurs like myself with setting up the M1.. At the current time I have both the pressure and the temp set up as a manual cal.. Thank You for your time.

[Stephen Dean]

We are currently reviewing the calibrations in the M1 ECU's and the 0 261 230 482 (supercedes the 340) will be up shortly.

[Suprafied]

We are currently reviewing the calibrations in the M1 ECU's and the 0 261 230 482 (supercedes the 340) will be up shortly.

Great to hear.. I know the KA IAT NTC2F sensor calibration is way off relative to their spec sheet.

DP

[Clean RC]

We are currently reviewing the calibrations in the M1 ECU's and the 0 261 230 482 (supercedes the 340) will be up shortly.

I keep checking the updates weekly and still have not seen this yet..