Not sure where to ask this so, I'm gonna start here.
I'm swapping a gen3 coyote motor into a 65 mustang, and plan to run it with Motec.
Where do I get a harness for the engine to connect to the Motec?
Is there someone that makes them, or is this something I will have to take on myself?
Wiring Harness needs
3 posts
• Page 1 of 1
Wiring Harness needs
by Stackinyotes on Wed Mar 05, 2025 2:08 am
- Stackinyotes
- Posts: 1
- Joined: Fri Feb 14, 2025 5:51 am
Re: Wiring Harness needs
by Stephen Dean on Wed Mar 05, 2025 9:11 am
Hi,
This will likely need to have a custom loom made, most of the aftermarket looms are designed around replacing the OEM loom when the same engine that is supplied with the vehicle is in place, not for transplanting a modern engine into an older vehicle.
This will likely need to have a custom loom made, most of the aftermarket looms are designed around replacing the OEM loom when the same engine that is supplied with the vehicle is in place, not for transplanting a modern engine into an older vehicle.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
MoTeC Research Centre Melbourne, Australia
-
Stephen Dean - Site Admin
- Posts: 1767
- Joined: Tue Dec 02, 2014 10:29 am
- Location: Melbourne
Re: Wiring Harness needs
by David Ferguson on Wed Mar 05, 2025 12:06 pm
Talk to your MoTeC dealer. I would probably start with a harness like this, and just modify or adapt to the MoTeC M1 ECU connectors. This is the Ford harness designed for their crate motor...
https://lmr.com/item/M12508M50/frpp-coy ... -m50?gQT=2
https://lmr.com/item/M12508M50/frpp-coy ... -m50?gQT=2
David Ferguson
Veracity Racing Data
Veracity Racing Data
- David Ferguson
- Pro User
- Posts: 1420
- Joined: Fri Nov 07, 2008 2:45 am
- Location: Paso Robles, California
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 13 guests