M150 Injector wiring.

[sleeper]

Hi.

Can you use the P&H injector outputs to run high imp injectors as saturated by just setting it up as saturated in setup? ( changing from low imp to high imp injectors, and dont want to rewire if needed. )

Thanks.

[stevieturbo]

Yes, it's just the software/instructions etc are poorly worded and laid out.

viewtopic.php?f=53&t=4129

[greenamex2]

As Stevie said, yes you can.

And you can use spare ignition outputs as well.

Hence you can run a six cylinder with coil on plug and sequential upper and lower injectors on an M130. Just.

[sleeper]

Thank you for the help.