idle to high
5 posts
• Page 1 of 1
idle to high
by nwwil on Tue Aug 29, 2017 12:36 am
i can not get my car to idle any lower than 2000 rpm, useing a ford falcon turbo fbw and m150
- nwwil
- Posts: 20
- Joined: Sun Jun 02, 2013 7:19 am
Re: idle too high
by David Ferguson on Tue Aug 29, 2017 2:52 am
Is this a new problem, or a new installation?
So many questions... -- could you post your configuration and a log from the engine running?
So many questions... -- could you post your configuration and a log from the engine running?
Last edited by David Ferguson on Tue Aug 29, 2017 9:05 am, edited 1 time in total.
David Ferguson
Veracity Racing Data
Veracity Racing Data
- David Ferguson
- Pro User
- Posts: 1362
- Joined: Fri Nov 07, 2008 2:45 am
- Location: Paso Robles, California
Re: idle too high
by David Ferguson on Tue Aug 29, 2017 9:03 am
Things that control whether the idle system is active:
Do you have Idle Mode enabled (Tune->Engine Systems->Idle Aim Idle Setup Panel)?
What are the values in the Idle Aim Main table?
What is the value of Idle Activate Engine Speed Margin?
What is the value of Idle Activate Throttle Pedal Threshold?
Things that control the Throttle Aim:
What is the Throttle Position when the engine is idling at 2000 RPM?
What is the value of Idle Actuator Throttle Aim?
What does the table Idle Mass Flow Feed Forward look like?
What are the values for Idle Mass Flow Proportional Gain, and all the Idle Mass Flow Integral XXX parameters.
Do you have Idle Mode enabled (Tune->Engine Systems->Idle Aim Idle Setup Panel)?
What are the values in the Idle Aim Main table?
What is the value of Idle Activate Engine Speed Margin?
What is the value of Idle Activate Throttle Pedal Threshold?
Things that control the Throttle Aim:
What is the Throttle Position when the engine is idling at 2000 RPM?
What is the value of Idle Actuator Throttle Aim?
What does the table Idle Mass Flow Feed Forward look like?
What are the values for Idle Mass Flow Proportional Gain, and all the Idle Mass Flow Integral XXX parameters.
David Ferguson
Veracity Racing Data
Veracity Racing Data
- David Ferguson
- Pro User
- Posts: 1362
- Joined: Fri Nov 07, 2008 2:45 am
- Location: Paso Robles, California
Re: idle to high
by Stephen Dean on Tue Aug 29, 2017 9:05 am
As David said, Can you please post logging (preferred) or the M1 Package thanks.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
MoTeC Research Centre Melbourne, Australia
-
Stephen Dean - Site Admin
- Posts: 1688
- Joined: Tue Dec 02, 2014 10:29 am
- Location: Melbourne
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 42 guests