MoTeC Global Forum

Posted: **Mon Jul 08, 2013 11:06 am**

Wanted to watch the video on installing the 1000cc injectors in my Yamaha and it will only run for 16 minutes and then locks up.
I tried it several times.
Is anyone even trying this tutorial or maybe one of the Motec techs can take a look and fix it ?
The injectors are on my list to do and coming up soon.
Thanks,
Max

Posted: **Mon Jul 08, 2013 5:21 pm**

Hi Maxadrenaline,

Thank you for bring our attention to this broken video. (just to confirm, it's not just you).
Unfortunately every backup I can find of this file also appears to be broken at this point.
While I try to resolve this, if you have any questions regarding upgrading to the 1000cc injectors please feel free to ask here.

Regards
MattW

Posted: **Mon Jul 08, 2013 8:38 pm**

Seems that many other Motec help videos are kinda broken too.

Some of them can be watched through if one changes display resolution at some point, usually just before breaking point. Re-uploading them would be good since they are a helpful resource.

Thank You in advance!

Posted: **Tue Jul 09, 2013 2:51 am**

PQatPIT wrote:Seems that many other Motec help videos are kinda broken too.

Some of them can be watched through if one changes display resolution at some point, usually just before breaking point. Re-uploading them would be good since they are a helpful resource.

Thank You in advance!

Thank you for the quick replies.
I did try different resolutions and same thing. Broken....
I have basic knowledge of installing the injectors which means I will surely be asking questions.
Thanks again.
Max

MoTeC Global Forum

PWC Injector Webinar Not Working

PWC Injector Webinar Not Working

Re: PWC Injector Webinar Not Working

Re: PWC Injector Webinar Not Working

Re: PWC Injector Webinar Not Working