Hi,
I am the member of NUST Formula Student team Pakistan. We are planning to use Motec M84 ECU on Cbr600rr for the first time. Is it practical and easy to make our own harness or it is advised to use the wiring loom provided by the Motec?
M84 Wiring loom
2 posts
• Page 1 of 1
M84 Wiring loom
by umair on Tue Feb 17, 2015 3:38 am
- umair
- Posts: 1
- Joined: Wed Feb 11, 2015 11:19 pm
Re: M84 Wiring loom
by Paragon on Tue May 19, 2015 9:36 am
Very practical to make you own loom up - then at least it will fit !
Don't get hung up with using Tefzel wire, there is plenty of good quality mil spec wire out there that is not teflon coated. Most of the Honda connectors are available from www.motodata.co.nz
Spec, plan, measure - good luck !
Don't get hung up with using Tefzel wire, there is plenty of good quality mil spec wire out there that is not teflon coated. Most of the Honda connectors are available from www.motodata.co.nz
Spec, plan, measure - good luck !
- Paragon
- Posts: 7
- Joined: Mon Dec 29, 2014 11:57 am
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests