MoTeC Global Forum

Posted: **Sat Jan 04, 2020 11:35 pm**

Please help
I Have a RX7 FD 13B REW engine
I have changed the ECU to M84 running primary and secondary injection
The problem I am having is setting up a base map to start the vehicle
It is running but badly
Under diagnostic screen the fault codes are
Error Injector 1 Combined Peak
Error Injector 2 Combined Peak
The injectors are Injector Dynamics 725 (primary)
And 2000 secondarys
Does anyone know the settings I should be using for these injectors
IJPU setting
Thanks in advance

Posted: **Sat Jan 04, 2020 11:38 pm**

Also this is my first post so I appogise if its listed in the incorrect place
Thanks

Posted: **Tue Feb 11, 2020 8:52 am**

Hi Ricky,

I have added the data for the dead times for the two injectors that you have.

IJPU should be 10.

Posted: **Tue Feb 11, 2020 8:59 am**

Thats Great
Thanks for the reply

MoTeC Global Forum

M84 injector Peak error for injector dynamics injectors

M84 injector Peak error for injector dynamics injectors

Re: M84 injector Peak error for injector dynamics injectors

Re: M84 injector Peak error for injector dynamics injectors

Re: M84 injector Peak error for injector dynamics injectors