MoTeC Global Forum

Posted: **Sun Feb 01, 2015 9:21 am**

Hi
Running a M84 on 4 cyl with 4 cop, 60-2 and sync on camshaft
Everything running just fine until I exceeds 20% on the tps signal.
If I go over 20% tps the F APW (ms) goes to zero
It happens all over the rpm range
Any suggestions ?

Posted: **Sun Feb 01, 2015 4:16 pm**

Please post your cal and a log.

Posted: **Sun Feb 01, 2015 10:00 pm**

Tried to upload the map but get this message : The extension m84-11 is not allowed.

Posted: **Mon Feb 02, 2015 7:44 am**

Try putting your cal inside a .zip file, im pretty sure the forum will attach that ok. If not you could share it using a sharing site or google drive, onedrive etc.

MoTeC Global Forum

Fuel cut on tps value

Fuel cut on tps value

Re: Fuel cut on tps value

Re: Fuel cut on tps value

Re: Fuel cut on tps value