Zx10 nosync error
Posted: Tue Apr 30, 2013 8:56 amHas anyone run a m84 on the zx10 yet? This is my first motec and I'm having some difficulty getting it to sync. I'll provide what ever info that is needed. Thanks in advance.
MoTeC Global Forum
The official support forum for MoTeC products
https://forum.motec.com.au/
Zx10 nosync error
Page 1 of 1
Posted: Tue Apr 30, 2013 8:56 amRe: Zx10 nosync error
Posted: Wed May 01, 2013 7:49 pmCan you send a couple of ref/sync captures, one with all the plugs in and one with cyl 1 plug removed?
Re: Zx10 nosync error
Posted: Thu May 02, 2013 1:26 pmI Think i have my ref and sync sensors wired wrong. The Ref wiring is going to the Sync sensor and the Sync wiring is going to the Ref sensor. I am not sure how i missed this or the other people i sent the Capture to. Take and look and see what you think. Also i have not seen many Captures but it looks like my sensor voltage is really high during cranking on my ref sensor(sync sensor on this graph)
- refsync.jpg (429.71 KiB) Viewed 10030 times