MoTeC Global Forum

M84 ECU Manager Ver 1.10K2 can't adjust RS232

There no RS232 telemetry Setup at

Adjust>General Setup>Communications


Tell me How to Set Up or Send Program Patch

Hi,

The RS232 RX on an M84 is fixed to a Baud rate of 19200 and cannot be changed as this is hardcoded into the firmware. Are you using a GPS with a different baud rate?

Hi,

My tuner connected

GPS TX PIN to ECU TX PIN

So, it's reconnect

GPS TX PIN to ECU RX PIN

It's working!!

Thanks.