Can a TCMux or an SDL3 module work with M84 ECU?

[Vassili Wang]

Can a TCMux or an SDL3 module work with M84 ECU? I've found that the software didn't allow users to configue the channel of Wheel Speed. And there is only "SLM" in the "communication" menu.


Thanks ~

[OmarK]

You are correct the inputs are fixed in the M84 and therefore you cannot use a TCMux, is there is a reason you need to use the TCMux?

An SDL3 can definitely be connected to the M84 via CAN, there is a fixed list of channels that is being sent. To view the channels in the SDL3 Manager select the MoTeC M84 CAN template.

[gts_215i]

+1 request for the TC Mux input enabled

4 digital inputs -

1 x TC Mux (with the TC on/off function)
1 x GM fuel composition sensor
1 x A/C Request
1 x Clutch Switch (Launch / Traction Control)

[MarkMc]

The A/C request and Clutch can go onto switched inputs.