BMW E36 M42 Startup - REF/SYNC

[mick41zxr]

Hi,
Setting up a BMW E36 318is (M42).
Having trouble getting the engine to Sync.
Able to test clean spark & injectors. Getting a clean RSC file.

REF/Sync

RefSync-Capture.JPG (363.52 KiB) Viewed 13838 times

318is ref-sync7 - rev-sync.rsc2

RSC Capture

(64.45 KiB) Downloaded 1300 times

I believe I have CRIP set ok

CRIP

CRIP-Setup.JPG (45.02 KiB) Viewed 13838 times

Does anyone have any suggestions.
Thanks,
Michael

[mick41zxr]

I believe this to be the CRIP Setup

M42 Crank Trigger.JPG (149.38 KiB) Viewed 13837 times

M84 file to see if I have made a mistake.

BMW 318is E36-2.m84-12

M84 Motec File

(72 KiB) Downloaded 1261 times

error

20211030_150018.jpg (734.5 KiB) Viewed 13833 times

Any help appreciated.
Thanks,
Michael

[GWRMOTORSPORT]

Hi Michael, had a quick look at your ECU file and the ref & sync mag levels are all 9.5v,
they need to be set to approx 1/3 of the peak voltage at various RPM sites,
From the ref sync capture which seems to be at about 310 rpm I would use ref 1.3v and sync 1.2v
set the whole mag tables to this, it should sync up and start and then do some more captures and work out
the mag levels. Also the trigger wheel looks like its either running out of true or is out of shape,
the constant dip in the ref voltages just before the sync signal needs possible looking at.

Hope this helps

Regards

STEVE

GWR MOTORSPORT
PM if you need more help

[mick41zxr]

Thanks Steve,
Changed Mag Tables & startup up straight away.
Much appreciated.
Michael

[muigandy]

Thanks for trying to help!