Lancia Delta Integrale (1993) ECU + PDM
Posted: Wed Feb 28, 2018 8:33 pmThe Delta has already had its engine loom built and a number of other sensors for intake pre and post intercooler including environmetal sensors have been included and work very well.
Idle is still generally a problem for what is essentially a road car. The body loom is being built up by Owen Devlopments in the UK this summer.
I am currently stuck at the display level, whilst the C1812 is great it is 4cm to narrow for the original display. I am looking into driving directly a couple of CANBUS steppers, something like the speedhut.com units, and placing a 7" display between them or just biting the bullet and sticking to the C1812.
Idle is still generally a problem for what is essentially a road car. The body loom is being built up by Owen Devlopments in the UK this summer.
I am currently stuck at the display level, whilst the C1812 is great it is 4cm to narrow for the original display. I am looking into driving directly a couple of CANBUS steppers, something like the speedhut.com units, and placing a 7" display between them or just biting the bullet and sticking to the C1812.