help Broke my engine

Forum for general discussions on engine tuning, not specific to a particular motec ECU

help Broke my engine

Postby mhd on Mon May 11, 2009 8:10 pm

Hi every body

a few days a go during auto cross comption the track only 1:30 min after finshing the track I heard the engine making tiking sound badly , and the car was before very good
I saved the data looging and the file
So can any body tell me what wrong was lead to broke my engine
The engine EJ25 stroker 2.71L GT35 Big cams and a lot more
I was Running anti lage On and less than 1 Bar of boost on 98RON fuel

Thank's in advance for your help guys
M.Olabi
Attachments
EJ25 STI.e35
(72 KiB) Downloaded 1287 times
20090507-1048002.ld
(283.74 KiB) Downloaded 1162 times
M.Olabi
ProRacing Co.
mhd
 
Posts: 40
Joined: Sun Jan 18, 2009 10:30 pm
Location: Ankara - Turkey

Re: help Broke my engine

Postby RossB on Wed May 27, 2009 3:44 pm

Your log file is not showing much, you seem to have lost the lambda reading during the run. What broke in the engine?
RossB
 
Posts: 474
Joined: Thu May 01, 2008 2:57 pm

Re: help Broke my engine

Postby mhd on Thu May 28, 2009 12:12 am

Dear Ross B

Thank's for rplying
the rod and the rod bearing for the first piston broken and I notice some knock mark also on the same piston(the car stroker pro BC 2.71 engine can handel over 650HP)
Also I notice on the 1 gear at 5000rpm 200kpa the car run 1.00 lamda reading but on the 4 gear the car at 5000 200kpa the car run 0.80 lamda Whay ? this happen only in the short track (autocross) when I used 1 and 2 gear only and a lot on and off TP

Thank's a Lot
M.Olabi
M.Olabi
ProRacing Co.
mhd
 
Posts: 40
Joined: Sun Jan 18, 2009 10:30 pm
Location: Ankara - Turkey


Return to Tuning discussions

Who is online

Users browsing this forum: No registered users and 4 guests