C16 fuel on motec

Forum for general discussions on engine tuning, not specific to a particular motec ECU

C16 fuel on motec

Postby O.alsuw1 on Wed Sep 21, 2016 8:14 pm

Hello,
I have a turbo charged that runs on pump gas with 98 ron fuel and i am planning to mix the fuel with c16 fuel, from my knowledge pump gas has stoicmetric value of 14.7 and c16 is 14.77.
Currently my engine runs on 1.4 boost and has igntion timing of 15 degrees, my question is how much timing could i increase if i put 50% c16 and 50% pump gas also, can i use c16 for daily use and how can i tune it? Should i make 2 maps? 1 for if i am only going to use pump gas and the other for when using the mixture? And what afr should i aim for? Currently runing on 11.5
Thanks
O.alsuw1
 
Posts: 2
Joined: Sat May 07, 2016 3:37 pm

Re: C16 fuel on motec

Postby stevieturbo on Thu Sep 22, 2016 3:04 am

To be fair...by virtue of you asking all those questions....you should really take the car to a competent tuner and let them sort it.
stevieturbo
 
Posts: 503
Joined: Fri Jul 11, 2008 3:32 am

Re: C16 fuel on motec

Postby Scott@FP on Thu Sep 22, 2016 11:28 am

Modern oxygenated pump fuels are closer to 14.0:1, all gasolines are a blend and will have differing stoich values.
Scott@FP
 
Posts: 421
Joined: Thu Jul 10, 2008 7:57 pm


Return to Tuning discussions

Who is online

Users browsing this forum: No registered users and 13 guests

cron