SDC2 OEM Connector Wiring Tools
![Post Post](./styles/SF_Glacier_Lite/imageset/icon_post_target.gif)
Hi,
I am installing a SDC2v into a JDM Sti RA MY99, adding in wheel speeds sensor etc.
My biggest challenge is in removing contacts from the OEM Connector. I have all new shells and contacts but extracting a contact is nigh on impossible, there HAS to a better way.
Could anyone recommend a tool to de-pin this style of factory connector.
https://au.mouser.com/ProductDetail/571-316372-6
Uses these pins https://au.mouser.com/new/te-connectivi ... multilock/
Simon
I am installing a SDC2v into a JDM Sti RA MY99, adding in wheel speeds sensor etc.
My biggest challenge is in removing contacts from the OEM Connector. I have all new shells and contacts but extracting a contact is nigh on impossible, there HAS to a better way.
Could anyone recommend a tool to de-pin this style of factory connector.
https://au.mouser.com/ProductDetail/571-316372-6
Uses these pins https://au.mouser.com/new/te-connectivi ... multilock/
Simon