MoTeC Global Forum

Hi guys

can you tel me the correct (crip) crank index position setting for a 2008 subaru JDM spec 2 ltr double vvt engine ?
as the 3 base maps i have are all diferent from 547 to 580 !! and the release notes give 2 diferent setings surely on a production engine there cannot be that much error !!! i know its best to check this on each engine but i need to know that im in the right area to start with,,
the base map i was supplied had 580 and the engine sounds very retarded and got very hot on the exhaust at idle


thanks guys

any ideas guys ?

thanks

I think 560 coz I recive M800 OEM for 2006 STI in the base map was 580 after checking I found it 560 for the 2006 STI DBW, some people saied that it 550 also
the best way to check by your self

cheers

According to my information it should be 447 on a dual vvt 2.0 enigine. I would always recommend checking it with a timing light though.

thanks very much guys