m800 pnp ecu wrx7

[NOS0609]

hi ive got a wrx 2001 with a 2.5 stroked motor
rigoli built, cams upgraded
aps turbo and intercooler
3inch exhaust
top feed 550cc injectors
5 speed full dog box

has m800 ecu pnp wrx7 rev A and has been tuned by previous owner who has told me that the car was detunned due to the motor not being run in as yet was hopping if someone could look over the tune file and point me in the right direction

[Stephen Dean]

Hi,

The best option is to take your car to an approved MoTeC Dealer with a dyno and they can check the tuning safely on the dyno.

https://www.motec.com.au/dealers/