Page 1 of 1

Pinout for EVO IX M800 pnp

PostPosted: Wed Oct 03, 2012 2:47 pm
by DJDINO
Hi,
I have a EVO IX that we are installing a pnp M800 into, previously had a Vipec pnp, I will be using a Racepak IQ3 which I have bought the cable for that requires the CAN high and low from the M800, the Vipec used the AFM wiring for MAP and IAT assume Motec may be different ? if anyone has the pinout that would be much appreciated.
Also I notice the CAN cord from the Motec board will need to have part of the original case notched ?
Serial no 13003-09953 (assume this is the serial no) other no on board is S03071498

Re: Pinout for EVO IX M800 pnp

PostPosted: Wed Oct 03, 2012 3:23 pm
by YuriK
Sorted via email

YuriK

Re: Pinout for EVO IX M800 pnp

PostPosted: Wed Oct 03, 2012 4:12 pm
by DJDINO
Thanks Yuri,

This is why I am now using Motec, fantastic service :D

Re: Pinout for EVO IX M800 pnp

PostPosted: Wed Mar 27, 2013 5:43 pm
by BoraCİFTCİ
Have the same problem as me and pin outs should me was still one issue I opened 5 months
did not answer what is the problem?

He did not even so much important information, the ECU box

ECU number.
13003-13281 motec M800 p n p

Mail: bora_cftc@hotmail.com

Re: Pinout for EVO IX M800 pnp

PostPosted: Tue Apr 15, 2014 12:06 am
by Loqy
Hi,

Please kindly share the Pin Out for Evo IX M800 PnP.

I really appreciate it.