M800 WRX Plug-in 13003 ECU
4 posts
• Page 1 of 1
M800 WRX Plug-in 13003 ECU
by Tunedgether on Wed Mar 27, 2024 9:28 pm
I have 13003-14078 ECU. But my ECU no have LK25,27and28 like in the manual DVIN0014. How do I instsll it on a car with push button start?
- Tunedgether
- Posts: 25
- Joined: Thu Aug 18, 2016 7:37 am
Re: M800 WRX Plug-in 13003 ECU
by Stephen Dean on Thu Mar 28, 2024 11:11 am
Hi,
Can you post a photo of the underside of the ECU board?
Can you post a photo of the underside of the ECU board?
Stephen Dean
MoTeC Research Centre Melbourne, Australia
MoTeC Research Centre Melbourne, Australia
-
Stephen Dean - Site Admin
- Posts: 1717
- Joined: Tue Dec 02, 2014 10:29 am
- Location: Melbourne
Re: M800 WRX Plug-in 13003 ECU
by Tunedgether on Thu Mar 28, 2024 4:13 pm
Please see attached pictures.
- Attachments
-
- 20240328_120622.jpg (4.24 MiB) Viewed 2930 times
-
- 20240328_120601.jpg (4.76 MiB) Viewed 2930 times
- Tunedgether
- Posts: 25
- Joined: Thu Aug 18, 2016 7:37 am
Re: M800 WRX Plug-in 13003 ECU
by NathanB on Thu Mar 28, 2024 4:48 pm
You have a Revision A adapter board.
The Additional links from the document are only present on the Rev B and Rev C boards.
The Additional links from the document are only present on the Rev B and Rev C boards.
- NathanB
- MoTeC
- Posts: 207
- Joined: Thu Oct 15, 2020 1:50 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest