MoTeC Global Forum

Posted: **Mon Sep 18, 2023 5:53 am**

Hi all

Just to check...Can I take it that if one of my two Bosch sensors is reading a lambda of 10.0 that it needs replacement?

The other reads about 1.28 in free air. The reading follow the sensors are switched.

Posted: **Mon Sep 18, 2023 10:02 am**

If you do a calibration of the sensor through LTC manager, does it still read 10.0? If so, then it is likely that the sensor has faulted out.

MoTeC Global Forum

Bosch 4.9 LTCD

Bosch 4.9 LTCD

Re: Bosch 4.9 LTCD