Hi from New Calédonia
I have to install an M48 ecu , and need to order a wiring loom kit , I would like to know if it comes like male ecu connectors with pre crimped wire lengths , or has it got to be crimped with special tools on the spot ?
Thanks
Wiring M48
3 posts
• Page 1 of 1
Wiring M48
by John on Mon Mar 16, 2009 11:49 am
WRX MY99 .Engine closedeck 2.71l strocker .Heads sti big valve .injectors 2200 cc .Turbochargers GTX4202 Twin scroll.Dog Box PPG . Motec M800 OEM.Dash SDL3
- John
- Posts: 8
- Joined: Sat Jul 12, 2008 12:36 pm
- Location: New Calédonia
Re: Wiring M48
by OmarK on Tue Mar 17, 2009 1:06 pm
Hi John,
All our ECU looms have the female connectors to fit the ECU with the wires all crimped and installed into the connector with the other end of the wire unterminated .
All our ECU looms have the female connectors to fit the ECU with the wires all crimped and installed into the connector with the other end of the wire unterminated .
- OmarK
- Posts: 214
- Joined: Mon Nov 10, 2008 4:39 pm
Re: Wiring M48
by John on Thu Mar 19, 2009 8:00 pm
Thanks
WRX MY99 .Engine closedeck 2.71l strocker .Heads sti big valve .injectors 2200 cc .Turbochargers GTX4202 Twin scroll.Dog Box PPG . Motec M800 OEM.Dash SDL3
- John
- Posts: 8
- Joined: Sat Jul 12, 2008 12:36 pm
- Location: New Calédonia
3 posts
• Page 1 of 1
Return to Sensors, Valves and Wiring
Who is online
Users browsing this forum: No registered users and 16 guests