bosch brake sensor pss-260 calibration needed
Posted:
Mon Jun 13, 2016 11:24 amby pold9000
hello
i only find a datasheet but there are no values for to calibration included.
please can you provide with the values or a file for the adl2
bye
wolfgang
Re: bosch brake sensor pss-260 calibration needed
Posted:
Tue Jun 14, 2016 9:18 amby Stephen Dean
Hi Wolfgang,
We do not have a calibration for that sensor, we can do one if you would like to send it to us, via your local dealer.
According to the datasheet that Bosch has for the sensor, you should have 0.500V as 0bar Absolute, and 4.5V as 260bar for a calibration. This is a linear scale, so you only need these two numbers. Put them into your calibration in the dash, and you should read 1bar as the output when the sensor is exposed to free air.
Re: bosch brake sensor pss-260 calibration needed
Posted:
Tue Jun 14, 2016 11:29 pmby pold9000
ok i have entered this values
the only problem i have i must use 2 decimal in the "practice" view
bye
wolfgang