MoTeC Global Forum

Hello,

i have a Problem with my aircondition,

I use 3 outputs for the AC
- A23 control
- A1 RPM
- B5 switch

As i needed an output for a exhaust valve my tuner used the Pin A23 for it.
Now i want my AC back working, so i putted the AirconditionPin back to A23, but i have no idea what i have to change in the software.

Pin A23 is Aux3
-Function is set to 3
-Parameters is everything "0" except for Frequency which is "10"

any ideas what to do?
cu Andy

In the supra

the AC system is a slef contained unit.

AC Amplifier, the temp control and the system itself.

The AC Amplifier requires the "OK" signal from TCCS which is what that Aux pin23 is for.