Hello Guys,
Trying to set up an LTCD 4.9 on an M600 (upgrade from old Lambda system)
Think I have done it correctly following manuals etc.
What Lambda value should I have with the ignition on and engine not running?
Thanks
LTCD 4.9 configuration on M600
2 posts
• Page 1 of 1
LTCD 4.9 configuration on M600
by 48DZI on Sat Mar 05, 2022 3:37 am
- 48DZI
- Posts: 5
- Joined: Sat Nov 21, 2009 5:50 am
Re: LTCD 4.9 configuration on M600
by Stephen Dean on Mon Mar 07, 2022 8:55 am
Hi,
The Lambda channels will read 5.00 until the engine is running and the Lambda sensors are enabled.
The Lambda channels will read 5.00 until the engine is running and the Lambda sensors are enabled.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
MoTeC Research Centre Melbourne, Australia
-
Stephen Dean - Site Admin
- Posts: 1614
- Joined: Tue Dec 02, 2014 10:29 am
- Location: Melbourne
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests