Are there any plans to work with the new LSU ADV sensor from bosch? would this be the same controller or different?
About to pull the trigger on a big order but can keep the wideband purchase till everything is ready if need be.
LSU ADV
6 posts
• Page 1 of 1
Re: LSU ADV
by Stephen Dean on Mon Nov 04, 2019 1:54 pm
Hi,
We are investigating the integration of these sensors into the LTC environment. I have no timescale for this to be done.
We are investigating the integration of these sensors into the LTC environment. I have no timescale for this to be done.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
MoTeC Research Centre Melbourne, Australia
-
Stephen Dean - Site Admin
- Posts: 1614
- Joined: Tue Dec 02, 2014 10:29 am
- Location: Melbourne
Re: LSU ADV
by ZT-R on Sat Nov 09, 2019 11:19 am
i would imagine this would be a hardware upgrade, like buying a new LTC?
- ZT-R
- Posts: 13
- Joined: Mon Aug 27, 2018 3:34 am
Re: LSU ADV
by Stephen Dean on Fri Nov 15, 2019 1:40 pm
It may not require new hardware, as the connectors are the same for the 4.9 and the ADV.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
MoTeC Research Centre Melbourne, Australia
-
Stephen Dean - Site Admin
- Posts: 1614
- Joined: Tue Dec 02, 2014 10:29 am
- Location: Melbourne
Re: LSU ADV
by blackforestracing on Fri Dec 16, 2022 1:54 pm
Is there any progress on this front? Interested to swap my Dyno over to ADV sensors.
- blackforestracing
- Posts: 3
- Joined: Fri Jun 28, 2019 11:59 am
Re: LSU ADV
by NathanB on Mon Dec 19, 2022 4:13 pm
This is being re investigated at present (nothing came of the initial investigation)
If it does come to fruition, it will only be a development for the LTC, and not the PLM.
If it does come to fruition, it will only be a development for the LTC, and not the PLM.
- NathanB
- MoTeC
- Posts: 190
- Joined: Thu Oct 15, 2020 1:50 pm
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest