Hella Gen3 Ballasts and D2S HID Bulbs
Posted: Sun Mar 26, 2023 1:13 amThinking of start up current here....
Would it be OK to use 1 20A output for both HID headlights?
Would it be OK to use 1 20A output for both HID headlights?
MoTeC Global Forum
The official support forum for MoTeC products
https://forum.motec.com.au/
Hella Gen3 Ballasts and D2S HID Bulbs
Page 1 of 1
Posted: Sun Mar 26, 2023 1:13 amRe: Hella Gen3 Ballasts and D2S HID Bulbs
Posted: Sun Mar 26, 2023 5:29 amHave you tried hooking it up, and logging the current data using the PDM to measure it? if you don't have a digital storage scope with a current probe, then the PDM isn't a bad substitute, just setup a little bench harness with PDM can to your logigng device and test one light, then double the current draw if using one circuit.