Data logging PDM32 current o/p's with an ADL

[theexhaustman]

I want to transmit the output currents of specific PDM with my ADL transmitted over CAN. How do I set up the ADL can Tx and the ADL can Rx ?

Thanks in advance.

[David Ferguson]

Exactly which ADL? ADL2 & ADL3 should have the templates to RX output status / current already, just select them.

[theexhaustman]

Original ADL, Not #2 or #3.

[David Ferguson]

Appendix 2 of the PDM manual has the output messages from the PDM. On the ADL, use the "Advanced.." button to configure the channels you wish to receive. There are some tech notes and webinars on basic CAN info if you need help understanding the terminology and how it all works.

Do you also want to send channels from the ADL to the PDM? Give us some details on what you are trying to do.

Sometimes we can learn a lot more by looking at your configuration (PDM and ADL), so attaching those to your forum posts here is helpful.