Standby mode CAN

Discussion and support for MoTeC Power Distribution Modules
Post a reply

Standby mode CAN

Postby greenamex2 on Fri Mar 21, 2025 8:31 pm

Hi

Quick question on the PDM standby mode.

When the manual says "No CAN messages have been received/Activity is present on the CAN bus" does that refer to ANY CAN bus or just the addresses being monitored by the PDM?

I am guessing the the former for going in to standby mode and the latter for exiting standby mode but just wanted to check.

Thanks in advance

Cool feature by the way, took a couple of goes to get working but really handy now my battery isolator has died!
Motec CDL3+M130+LTCD+MDD+PDM15+PDM16M+ESDL3
Nissan VQ30DE fitted to an AM Sportscars EX2 with a Hewland HP 2000
greenamex2
 
Posts: 377
Joined: Fri Sep 12, 2014 7:06 am
Location: England
Top

Re: Standby mode CAN

Postby Stephen Dean on Mon Mar 24, 2025 11:12 am

Hi,

It is any activity on the CAN Bus that is detected.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
Stephen Dean
Site Admin
 
Posts: 1766
Joined: Tue Dec 02, 2014 10:29 am
Location: Melbourne
Top

Re: Standby mode CAN

Postby greenamex2 on Tue Mar 25, 2025 7:07 am

Thanks for confirming Stephen.

Lucky I have a spare CAN bus then!
Motec CDL3+M130+LTCD+MDD+PDM15+PDM16M+ESDL3
Nissan VQ30DE fitted to an AM Sportscars EX2 with a Hewland HP 2000
greenamex2
 
Posts: 377
Joined: Fri Sep 12, 2014 7:06 am
Location: England
Top
Post a reply

Return to PDM15 PDM16 PDM30 and PDM32

Who is online

Users browsing this forum: No registered users and 6 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Glacier Style Designed by Ika © 2007, 2008 ShadowFlames Development