CDL3 RS232 serial OUTPUT

Discussion and support for current Advanced Dash Loggers, Sport Dash Loggers and Club dash loggers

CDL3 RS232 serial OUTPUT

Postby greenamex2 on Wed Nov 25, 2020 9:29 am

Hi all

I expect I am about to be very upset but...

Is there any way to OUTPUT a RS232 serial stream from a CDL3?


Was hoping to pick up a stream of some kind into the PC in the car for a Python driven gauges display without duplicating the UTC already attached to it with an after market USB to CAN device (ran out of USB ports).

Thanks in advance
Motec CDL3+M130+LTCD+MDD+PDM15+PDM16M+ESDL3
Nissan VQ30DE fitted to an AM Sportscars EX2 with a Hewland HP 2000
greenamex2
 
Posts: 370
Joined: Fri Sep 12, 2014 7:06 am
Location: England

Re: CDL3 RS232 serial OUTPUT

Postby David Ferguson on Wed Nov 25, 2020 9:59 am

Try Selecting Telemetry Only, then edit the template and change Device to Async TX 1. Modify the ASCII Transmit Setting to add a delimiter and termination. Add some channels and see what you get.

If you're planning to use serial GPS, you'll need to put that on another RS-232 RX

Good Luck.
David Ferguson
Veracity Racing Data
David Ferguson
Pro User
 
Posts: 1383
Joined: Fri Nov 07, 2008 2:45 am
Location: Paso Robles, California

Re: CDL3 RS232 serial OUTPUT

Postby greenamex2 on Wed Nov 25, 2020 6:51 pm

Looks very promising, thanks David.

Will test further when 15 dollar serial cable arrives!
Motec CDL3+M130+LTCD+MDD+PDM15+PDM16M+ESDL3
Nissan VQ30DE fitted to an AM Sportscars EX2 with a Hewland HP 2000
greenamex2
 
Posts: 370
Joined: Fri Sep 12, 2014 7:06 am
Location: England


Return to ADL3, SDL3 and CDL3

Who is online

Users browsing this forum: No registered users and 1 guest