Sports dash M1 can template

Discussion and support for current Advanced Dash Loggers, Sport Dash Loggers and Club dash loggers

Sports dash M1 can template

Postby Donovan CR6 on Fri Aug 07, 2020 7:53 pm

Hi
Is it possible to get a M1 template for a sport dash? Currently trying to connect to a M142. Cant even manually input it.

Thanks
Donovan CR6
 
Posts: 40
Joined: Tue Feb 07, 2017 10:45 pm

Re: Sports dash M1 can template

Postby adrian on Wed Aug 12, 2020 9:52 am

See below, you need to unzip the file and copy the templates to C:\Program Files (x86)\MoTeC\Dash\Sport Dash Manager 1.6\Comms Setup. You will then be able to select them in the communications setup in SDL Manager.
Attachments
SDL M1 Templates.zip
(5.51 KiB) Downloaded 982 times
adrian
MoTeC
 
Posts: 719
Joined: Mon Apr 13, 2015 5:16 pm

Re: Sports dash M1 can template

Postby Donovan CR6 on Wed Aug 12, 2020 6:26 pm

Hi Adrian
When trying to load the config I get this error just after it finishes loading.
Any Ideas?
Attachments
sdl error.jpg
sdl error.jpg (196.44 KiB) Viewed 10249 times
Donovan CR6
 
Posts: 40
Joined: Tue Feb 07, 2017 10:45 pm

Re: Sports dash M1 can template

Postby adrian on Wed Aug 19, 2020 3:03 pm

Can you send me the Dash configuration file that does this to support@motec.com.au
adrian
MoTeC
 
Posts: 719
Joined: Mon Apr 13, 2015 5:16 pm


Return to ADL3, SDL3 and CDL3

Who is online

Users browsing this forum: No registered users and 1 guest