Configuring CDL3 to Read GPS for Speed
Posted:
Thu Jun 06, 2013 11:11 pmby Herrubermensch
Customizing a CDL3 track kit and am at a bit of a loss as to how to get the unit to read GPS for road speed. Step by step help would be sincerely appreciated.
--Peter
Re: Configuring CDL3 to Read GPS for Speed
Posted:
Sun Jun 09, 2013 12:50 pmby zillarob
A few ways to do it depending on what you are trying to accomplish.
If you just want to display speed on the dash, click the "Setup Display" icon.
Double click on the field you want it displayed in and set to "GPS Speed".
Check the units and tick the box by "Speed" in the Enunciator section.