Page 1 of 1

SDL3 Maximum Logging Time

PostPosted: Tue Apr 09, 2013 5:09 am
by killerbee
Just finished a 6 hour event yesterday and was looking at the data today. Only seems to have captured the first 2 hours. We could have shutdown the dash and restarted during a driver change but didnt think to. Is this a real limitation or have I missed something ?

Re: SDL3 Maximum Logging Time

PostPosted: Tue Apr 09, 2013 6:47 am
by killerbee
Well other than having only 16 mb enabled on the SDL3 that is.

Re: SDL3 Maximum Logging Time

PostPosted: Thu Apr 11, 2013 7:37 pm
by chelspeed
In ADL3 manager (functions, logging setup) when you add channels to log and change the logging rate there's a status bar at the bottom which says you have X MB of logging and with the current logging you have Y days, hours, minutes of logging available. Is there similar in SDL manager?

Don't need to say but log less channels and / or at a lower rate and it will log for longer.

Re: SDL3 Maximum Logging Time

PostPosted: Fri Apr 12, 2013 12:31 am
by Holmz
Or download and clear the memory when splashing fuel or changing out drivers.