CDL Buttons
Posted: Thu Dec 22, 2011 9:40 amDoes Motec have a part number to order the push buttons separately ( unwired ) that are available on the CDL3 kits ?
67031-red
67032-yellow
67033-green
67034- blue
MoTeC Global Forum
The official support forum for MoTeC products
https://forum.motec.com.au/
CDL Buttons
Page 1 of 1
Posted: Thu Dec 22, 2011 9:40 amRe: CDL Buttons
Posted: Thu Dec 22, 2011 10:53 amRe: CDL Buttons
Posted: Fri Jan 06, 2012 8:12 pmThese part numbers are for the old waterproof type, I'm after the new CDL ones as displayed on the website.
Re: CDL Buttons
Posted: Sat Jan 07, 2012 11:28 pmThe new CDL3 buttons only come pre-wired in that loom as part number: 61221.
We used those buttons as they can be pre-wired (as they screw in from the back)
They are pre wired off site and have a DTM fitted to ease of use for customers.
Hope that helps..
regards,
Jamie
We used those buttons as they can be pre-wired (as they screw in from the back)
They are pre wired off site and have a DTM fitted to ease of use for customers.
Hope that helps..
regards,
Jamie
Re: CDL Buttons
Posted: Sun Jan 08, 2012 7:11 pmJamie,
Can you provide the manufacturer and model of the switch only ?
Can you provide the manufacturer and model of the switch only ?
Re: CDL Buttons
Posted: Mon Jan 09, 2012 2:21 pmActually I dont know, as we buy it as a complete unit from the supplier GRME (they are a Melbourne based MoTeC dealer).
If you talk to Gary there, he may be able to help
regards,
-Jamie
If you talk to Gary there, he may be able to help
regards,
-Jamie