CDL3 - Evo X - Reading boost.

[weap0n]

Hello.

I have the CDL3 Track logging kit installed on my Evo X.

I have had it for awhile and love it. However I have never been able to get it to read boost correctly.

Whether I select, PSI, PSIg, PSIa, Bar, etc, i get a positive reading at idle.

Under throttle the number reduces to zero as boost builds and then reads really high (seen it read 33+psi when I know I should only be making 24-26psi MAX) at higher RPM's.

I am an amature at setting up this dash. Is there something I can do in the 2d or 3d tables to fix this and get it to read boost correctly. (Just guessing here as i dont really know what tables actually do).

Any help, advice or guidance would be great.

Cheers

[weap0n]

I forgot to mention the oem boost controller has been replaced with a Grimmspeed 3-port. Still running the OEM ECU and getting all my reading for the dash through the OBD2 connection.

[weap0n]

Bump for help/advice.

[gkwestfrank]

post your config and a short log